Suzhou Nanomicro Technology Co., Ltd.

Products

Home > Products > LCD Spacer and Conductive Particles > Silica SPACER > NM Silica Spacer NI 090

Contact Supplier
Yuhua Fu

Ms. Yuhua Fu

Leave a message

NM Silica Spacer NI 090

Payment Type:
L/C,T/T
Incoterm:
FOB,CFR,CIF
Min. Order:
1
Transportation:
Ocean,Air
Share:
  • Product Description
Overview
Product Attributes

Model No.NI 090

Pore Size9 Um

Supply Ability & Additional Information

TransportationOcean,Air

Payment TypeL/C,T/T

IncotermFOB,CFR,CIF

A precise control of LCD cell gap containing liquid crystal is critical to achieving the best display performance. Spherical particles used to control the thickness of the liquid crystal layer must meet stringent requirements such as precise particle size, tight particle size distribution, suitable hardness, and excellent resistance against heat, cold and chemicals.

Nanomicro Tech provides a wide selection of both plastic and Silica Spacer. Silica SPACER is widely used for frame gap control, as well as cell gap control for special applications.
● Uniform sphere and smooth surface
● Accurate particle size control
● Narrow particle size distribution
● Excellent resistance against heat, cold and chemicals
● Good dispersity and no aggregation
● Excellent mechanical strength and superior crush resistance
● Free from contaminations
Stainless Steel Spacers

Typical characteristics of NM SILICA Spacer
:
Bunion Toe Spacer
    
Precise Particle Size Control of NM SILICA SPACER:
Silicone Contact Lenses    

Impurity Control of NM SILICA SPACER:
The amounts of ions in silica spacer are critical and tightly controlled in the entire manufacture processing. The amount of Fe, Ca, K, Na is detected by ICP spectrometer and Cl by ion chromatography.
Silicon Thermal Conductivity
       

NM SILICA SPACER Meets RoHS Requirements:

NM SILICA SPACER do not contain any chemicals prohibited by RoHS. NM SILICA SPACER is inspected yearly by an internationally certified agent to meet all RoHS requirements. The RoHS certification of NM SILICA SPACER is current and valid, a copy of which can be sent upon request.
NM SILICA SPACER
         

Type and Size of NM SILICA SPACER:
Nanomicro Tech provides two series (Si and SiS) of high quality SILICA spacers to meet various demanding application requirements for different customers. NM Si series silica spacer is widely used as side spacer, while NM SiS series spacer is applied in cell for special applications.
NM SILICA SPACER provides a broadest size selection from 2 µm to 20 µm. Our state-of-the-art manufacture facilities, advanced analytical instruments and reliable quality control system guarantee the quality and reproducibility of NM SILICA SPACER products.
Type and Size of NM SILICA SPACER
          

General rules: NM Si XXX;NM SiS XXX;NM - Nanomicro XXX - diameter, for example: 065 – 6.5 µm, 100 - 10.0 µm

l Standard products are: 2.0-5.0 µm in 0.25 µm increments; 5.0-10.7 µm in 0.10 µm increments; above 11.0 µm in 1.0 µm increment.
l Spacer of special size, below 2.0 µm or above 20.0 µm, is available upon request.
l Mean diameter of spacer is consistent from lot-to-lot according to Beckman Coulter Counter Multisizer 3.
Recommended Spraying Methods of NM SILICA SPACER:
When NM Si SILICA SPAER is used as side spacer, mix it directly with other ingredients. In case of cell gap applications, NM SiS SILICA SPACER can be either dry or wet sprayed.
Dry Spray : For best results, it is recommended to vacuum dry NM SILICA SPACER at 80 °C for 8 hrs (caps off) before dry spraying, which ensures SPACER disperse smoothly and freely.
Wet Spray: Disperse NM SILICA SPACER in organic solvent such as isopropanol or ethanol, ultrasonicate a while before adding proper amount of water. This usually works better than dispersing SPACER directly in aqueous solution containing of organic solvent.
Recommended spraying density:
Recommended Spraying Density
         

Spraying density and applied pressure should be adjusted according to SPACER size etc.. Service technicians from Nanomicro Technology Company are professionally trained to help our customers to achieve best results.

Packaging and Storage of NM SILICA SPACER 

NM SILICA SPACER is packaged in 10 g or 20 g glass vials with plastic caps and inserts to keep moisture away from the contents. The label on the vial includes product name, lot number, expiration date, weight, RoHS, inspection passing stamp, etc.
NM SILICA SPACER vials should be stored in dehumidifying cabinets with controlled temperature and humidity. The cabinet should be set at room temperature and kept under 25% humidity. It is recommended to use up the entire product in a vial once it is opened.
Packaging and Storage

 

Product Categories : LCD Spacer and Conductive Particles > Silica SPACER

Email to this supplier
  • *Subject:
  • *To:
    Ms. Yuhua Fu
  • *email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send